Search Catalog  
All Categories > Wireless M2M & Telematics Solutions > Proprietary Radio Modules > ConnexLink - Wireless Cable Replacement System > View Items  

ConnexLink - Wireless Cable Replacement System

Check up to five results to perform an action.

The Fastest Way to Wireless

Stock Locator Button

ConnexLink™ is the most flexible, affordable RF serial data device available for both consumers and OEMs looking to cut cables between USB devices. The system can enable local-area communication in industrial, commercial and office applications using frequency-hopping spread spectrum technology, providing reliable communication; even in RF-hostile environments.

Each ConnexLink communication system requires a central server node and any number of remote client nodes that operate in point-to-point or point-to-multipoint configurations. Users can create multiple sub-networks by assigning unique radio addresses to specific device groups.

ConnexLink implements a proprietary communication protocol to provide secure local data transmissions. Because it uses FHSS technology, the data remains reliable over varying distances. Each unit is small and easily portable for use in mobile and temporary settings as well as for fixed installations. Optional software enables custom configurations based on user needs.

ConnexLinks are approved for operation by FCC (USA), IC (Canada) and CE (Europe). No additional certification is required. Use of license-free frequency bands ensures that units are ready to use with no further certification requirements.

ConnexNet™ provides a complete hardware and software solution for adding wireless network connectivity to serial-based applications. The transceiver serves as a conduit between the user and multiple destination devices via a local network or the Internet.

Unlike other industrial wireless Ethernet offerings, ConnexNet does not require a COM port director. All software controls communicate directly to the device, greatly improving system latency. And ConnexNet will support a wireless Ethernet-to-serial bridge to allow separate networks to talk with one another simultaneously.

Each unit is small and easily portable for use in mobile or temporary settings as well as for fixed installations. FHSS modulation ensures reliable transmissions, while use of the 900 MHz ISM band makes ConnexNet ready to use with no further certification.






    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 12 of 12 1 

Item #

Network Architecture

Frequency Band Range

Max. Serial Interface Data Rate

Power Supply

CL4790-1000-232 Peer-to-peer 902 to 928 MHz 115.2 Kbps AC transformer to 7.5Vdc via 6-foot cable (183 cm)
CL4790-1000-232-SP Peer-to-peer 902 to 928 MHz 115.2 Kbps with Starter Packs
CL4490-1000-232 Server/client 902 to 928 MHz 115.2 Kbps AC transformer to 7.5Vdc via 6-foot cable (183 cm)
CL4490-1000-232-SP Server/client 902 to 928 MHz 115.2 Kbps with Starter Packs
CN4490-1000-232-SP Peer-to-peer 902 to 928 MHz 115.2 Kbps AC transformer via 6-foot cable (183 cm)
CN4790-1000-232-SP Server/client 902 to 928 MHz 115.2 Kbps AC transformer via 6-foot cable (183 cm)
CL4790-200-USB Peer-to-peer 902 to 928 MHz 115.2 Kbps N/A
CL4490-200-USB Server/client 902 to 928 MHz 115.2 Kbps N/A
CL2510-100-232 Point to Point, Point to multipoint 2400 to 2471 MHz N/A +6V to 30V DC
CL2510-100-232-SP Point to Point, Point to multipoint 2400 to 2471 MHz N/A +6V to 30V DC
CL400-SP Point to Point 2400 to 2483.5 MHz N/A +6V to 30V DC
CL402-SP Point to Point 2400 to 2483.5 MHz N/A +6V to 30V DC
  Results 1 - 12 of 12 1