Search Catalog  
All Categories > Thermal Management Solutions > Thermal Interface Materials > Phase Change TIMs > Tpcm™ 900 Series Phase Change Material > View Items  

Tpcm™ 900 Series Phase Change Material

Check up to five results to perform an action.

Stock Locator Button

Tpcm™ 900 is a high performance, non-electrically conductive phase change material. At 50°C, Tpcm™ 900 begins to soften and flow, filling the microscopic irregularities of both the thermal solution and the component's surfaces, thereby reducing thermal resistance.

Tpcm 900 is a flexible solid at room temperature and freestanding without reinforcing components that reduce thermal performance.

Tpcm 900 shows no thermal performance degradation after 1000 hours at 130°C, or after 500 cycles, from -25°C to 125°C. The material softens and does not fully change state resulting in minimal migration (pump out) at operating temperatures.

Tpcm 900 is supplied in rolls with top tabbed liners for easy manual or large volume automatic application. Individually die cut parts can also be supplied.

    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
Compare Items
  Results 1 - 3 of 3 1 

Item #




Thermal Conductivity

Thermal Resistance at 10 psi

Thermal Resistance at 50 psi

Tpcm 905C Yellow 0.005 inches
0.130 mm
1.31 g/cc 0.70 W/m-K 0.048 ºC-in2/W
0.310 ºC-cm2/W
0.029 ºC-in2/W
0.190 ºC-cm2/W
Tpcm 910 Yellow 0.010 inches
0.250 mm
1.39 g/cc 2.23 W/m-K 0.140 ºC-in2/W
0.900 ºC-cm2/W
0.083 ºC-in2/W
0.530 ºC-cm2/W
Tpcm 920 Yellow 0.020 inches
0.510 mm
1.39 g/cc 2.23 W/m-K 0.180 ºC-in2/W
1.140 ºC-cm2/W
0.095 ºC-in2/W
0.610 ºC-cm2/W
  Results 1 - 3 of 3 1